Gas Hob Installation - Fagor 6FID-4GL X Instructions For Use And Maintanence

There must not be any cabinet fitted right above the hob.
In case of mounting a horizontal partition "A" under the hob, leave the distance at least 150mm
between the hob and the partition (Fig. 6).
2 .2 GAS H OB I N ST ALLAT I ON
1. Make the 490 x 560 [mm] rectangular cut-out in the worktop. The dimensions of the cut-out can be
found in Fig. 7.
2. The hob is equipped with a seal with tape-protected adhesive surface. Remove the tape from the
seal.
3. Turn the hob upside down and stick the seal around the internal edge (Fig. 8).
4. Place the hob in the middle of the cut-out and push it so that the seal adheres tight to the worktop.
5. Fix the hob with the four brackets which are included together with other connecting parts (Fig. 9 and
10).
Fig. 5
Fig. 7
INSTALLATION
6
Fig. 6
Fig. 8
UK