Table of Contents
Advertisement
Door-in-Door Case
To open the Door-in-Door case, pull evenly on the
marked area. The Door-in-Door Case is removable
for easy cleaning and adjustment.
CAUTION
• Remove contents from Door-in-Door case before
disassembly.
1
To remove the Door-in-Door case, lift up
and pull out.
2
To replace the Door-in-Door case, line up
the tabs on the Door-In-Door case with the
slots on the door and push down until it
snaps into place.
Adjusting the Refrigerator
Shelves
The shelves in the refrigerator are adjustable to
meet individual storage needs. Your model may
have full or split shelves.
Adjusting the shelves to fit items of different
heights will make finding the exact item you want
easier.
Detaching the Shelf
1
Remove all items from the shelf. Lift the
back of the shelf slightly to disengage the
rail stops.
2
Holding the shelf with both hands, tilt the
shelf and pull it out.
Assembling the Shelf
1
Tilt the front of the shelf up and guide the
shelf into the slots at a desired height,
keeping shelf holder down.
2
Slide the shelf in, then lower the front of the
shelf.
CAUTION
• Make sure that shelves are level from one side
to the other. Failure to do so may result in the
shelf falling or spilled food.
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
• Glass shelves are heavy. Use special care when
removing them.
OPERATION
27
Advertisement
Table of Contents
