Table of Contents
Advertisement
Fan Speed Setting
•
Press the
speed LED will illuminate.
Swing setting
•
After the machine is started, press
swing movement.
Time-setting
•
Press
to enter startup-time setting mode when the unit is powered off, then
the LED will display the time, pressing
time from 1 to 24 hours.
•
Press
to enter shut down time setting mode when the unit is operating, then
the LED will display the time, pressing
time from 1 to 24 hours .
•
If the unit is turned on or off manually, or the water tank full condition occurs during
use, the timer function will be over-ridden.
WATER DRAINAGE
•
The dehumidifier has an internal water tank to collect water that accumulates
during the cooling process. This tank will need to be emptied periodically.
•
When the internal water tank is full the unit will go into standby mode and the
buzzer will sound 15 times.
•
The water tank will need to be emptied before normal operation can be resumed.
•
Lightly press on the sides of the tank with both hands and pull the tank out gently.
•
Discard the collected water.
•
Replace the drainage tank by pressing it into place firmly on both sides, and when
correctly positioned, normal operation can resume.
to set the fan speed to high or low, and the corresponding fan
to start or stop the air-outlet deflector
or
to adjust the automatic start
or
to adjust the automatic stop
6
Advertisement
Table of Contents
