Table of Contents
Advertisement
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
Do not use any means to accelerate the defrosting process or to clean, other than
those recommended by the manufacturer.
•
The appliance shall be stored in a room without continuously operating ignition
sources (for example: open flames, an operating gas appliance or an operating
electric heater).
•
Do not pierce or burn.
•
Be aware that refrigerants may not contain an odour.
•
The appliance shall be installed, operated and stored in a room with a floor area
larger than 4m
•
Keep any required ventilation openings clear of obstruction.
•
Servicing shall be performed only as recommended by the manufacturer.
•
The appliance shall be stored in a well-ventilated area where the room size
corresponds to the room area as specified for operation.
•
Any person who is involved with working on or breaking into a refrigerant circuit
should hold a current valid certificate from an industry-accredited assessment
authority, which authorises their competence to handle refrigerants safely in
accordance with an industry recognised assessment specification.
•
Servicing shall only be performed as recommended by the equipment
manufacturer. Maintenance and repair requiring the assistance of other skilled
personnel shall be carried out under the supervision of the person competent in
the use of flammable refrigerants.
•
All working procedure that affects safety means shall only be carried by competent
persons.
•
The appliance is only suitable for indoor use, and is not suitable for other
applications.
•
Follow local grid interconnection rules while installing the appliance and ensure
that it is properly grounded. If you have any question on electrical installation,
follow the instructions of the manufacturer, and if necessary, ask a professional
electrician to install it.
•
Place the appliance in a level and dry place and keep a distance of above 20cm
between the machine and the surrounding objects or walls.
•
After the appliance is installed, ensure that the mains plug is intact and firmly
plugged into the power outlet, and place the power cord to avoid a trip hazard.
•
Do not put any object into the air inlet and outlet of the air conditioning. Keep the
air inlet and outlet free from obstructions.
•
When drainage pipes are installed, ensure that the drainage pipes are properly
connected, and are not distorted or bent.
•
When moving the appliance, make sure that it is in an upright position.
•
The appliance should be kept away from gasoline, flammable gas, stoves and
other heat sources.
•
Don't disassemble, overhaul and modify the appliance arbitrarily, otherwise it may
cause a malfunction or harm to persons and properties.
•
To avoid danger, if a machine failure occurs, refer to a professional for repair.
•
Do not install and use the appliance in a bathroom or other humid environments.
•
Do not pull out the mains plug to turn off the appliance.
2.
2
Advertisement
Table of Contents
