Table of Contents
Advertisement
a After the programme has ended,
the display shows: "End".
Adjusting the "Ready in" time
before the programme starts
You can readjust the selected "Ready
in" time before the programme starts.
Press Start / Reload.
1.
Press Ready in repeatedly until the
2.
display indicates the desired
"Ready in" time.
Press Start / Reload.
3.
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note: No additional detergent is re-
quired. The soaking solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press Start / Re-
load.
To resume the programme, after
3.
the desired soaking time, press
Start / Reload.
Adding laundry
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Press Start / Reload.
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→ "Display", Page 20
Add or remove laundry.
2.
Close the door.
3.
Press Start / Reload.
4.
Cancelling the programme
Once the programme has started,
you can cancel it at any time.
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Press Start / Reload.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the شطفRinse programme.
– If the water level is high: Start
the عصرSpin or تفریغDrain pro-
gramme.
Remove the laundry.
3.
Resuming the programme
when the programme status
is Rinse Hold
Set the عصرSpin or تفریغDrain
1.
programme.
Press Start / Reload.
2.
Unloading the laundry
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Open the door.
1.
Remove the laundry.
2.
Basic operation en
31
Advertisement
Table of Contents
