Table of Contents
Advertisement
en Installation and connection
Save energy and conserve re-
sources
If you follow these instructions, your
appliance will use less electricity and
less water.
Do not exceed the programme's
maximum load capacity → Page 22.
A higher load capacity extends the
programme duration and in-
creases energy consumption.
Use the programme's maximum load
capacity → Page 22.
The energy and resource con-
sumption is the most efficient.
Add → Page 29 detergent based on
the laundry's degree of soiling.
For light to normal soiling, a smal-
ler amount of detergent is suffi-
cient. Observe the dosage recom-
mendation from the detergent
manufacturer.
Reduce the washing temperature for
lightly and normally soiled laundry.
At low temperatures, the appliance
consumes less energy. For light to
normal soiling, lower temperatures
than indicated on the care label
are also sufficient.
Set the maximum spin speed if you
want to dry the laundry in a tumble
dryer afterwards.
The drier the laundry, the shorter
the programme duration when dry-
ing which, in turn, reduces energy
consumption.
Wash the laundry without prewash.
Washing with prewash increases
the programme duration and in-
creases energy and water con-
sumption.
12
The appliance has a continuous
automatic load adjustment function.
Depending on the type of fabric
and load capacity, the continuous
automatic load adjustment func-
tion optimally adjusts the water
consumption and programme dur-
ation.
Energy saving mode
If you do not use the appliance for an
extended period, it automatically
switches to energy-saving mode. All
displays go out and Start / Reload
flashes.
Energy-saving mode ends when you
use the appliance again, e.g. if you
open or close the door.
Installation and connection
Installation and connec-
tion
You can find out where and how best
to install your appliance here. You
will also learn how to connect the ap-
pliance to the water and power sup-
ply.
Unpacking the appliance
Remove any packaging and pro-
1.
tective covers completely from the
appliance.
Check the appliance for visible
2.
damage.
ATTENTION! Objects remaining in
3.
the drum that are not designed for
operation with the appliance may
cause material damage and dam-
age to the appliance.
Remove these objects, along with
▶
all supplied accessories, from the
drum before starting the appliance.
Open the door and remove the ac-
cessory from the drum.
Advertisement
Table of Contents
