TROUBLESHOOTING
Continued...
14. Reinstall the rear access panel (M).
15. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars and cooking
grates inside the cookbox (N).
16. Remove and clean any ash or grease from inside the ash and grease
system. Once cleaned, reinstall the drawer (O). Replace disposable
drip pans as needed.
17. Push the hopper slide door closed (P).
18. Open the hopper lid and fill the hopper with your choice of WEBER
SMOKEFIRE ALL NATURAL HARDWOOD PELLETS (Q).
19. Plug in, power on the grill, and begin a cook to allow the controller to
run diagnostics. If the E3 error code still remains on the controller,
contact the Customer Service Representative in your area using the
contact information on our website.
M
N
30
O
P
Q