Weber SmokeFire EPX4 Owner's Manual page 27

E2 Fan Error
Checking Fan Electrical Connection
To clear the E2 error code from the controller, please follow these steps:
1. When the grill has completed the shutdown procedure and
completely cooled, power off the grill and unplug from power source
(A).
2. From the rear of your SMOKEFIRE grill, remove the rear access panel
by removing four screws (B).
3. Check the electrical connection to the fan (C). Make sure the
connector is securely joined to the fan's connection point.
4. Reinstall the rear access panel (D).
5. Plug in, power on the grill, and begin a cook to allow the controller to
run diagnostics.
6. If the E2 error code still remains on the controller, contact the
Customer Service Representative in your area using the contact
information on our website for fan replacement.
TROUBLESHOOTING
A
B
C
D
27
weber.com