Electrolux EW7T3372 User Manual page 21

There is also an alternative way of
cancelling:
1. Rotate the selector knob to the "Reset"
position .
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
9.11 Opening the lid - Adding
garments
If the temperature and level
of the water in the drum are
too high and/or the drum is
still rotating you should not
open the lid.
While a programme or the delay start
operates, the appliance lid is locked. The
display shows the indicator
1. Touch the Start/Pause
In the display the related lid lock indicator
goes off.
2. Open the appliance lid and drum
doors. If necessary, add or remove
the items. Close the drum door and
lid. Touch the Start/Pause
The programme or the delay start
continues.
9.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
The indicator of the Start/Pause
button goes off.
The lid unlocks and the indicator
goes off.
1. Press button On/Off to deactivate the
appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the lid and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
9.13 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
.
• The time area shows
button.
display shows the lid locked
• The drum still turns at regular
intervals to prevent creases in the
laundry.
• The lid stays locked.
• You must drain the water to open the
button.
lid:
1. If necessary, touch the Spin button to
decrease the spin speed proposed
by the appliance.
2. Press the Start/Pause button:
• If you have set Rinse Hold
• If you have set Night
The option indicator Rinse Hold
Night
3. When the programme is completed
and the lid locked indicator
off, you can open the lid.
4. Press the On/Off button for a few
seconds to deactivate the appliance.
9.14 Stand-by option
The Stand-by function automatically
deactivates the appliance to reduce the
energy consumption when:
When you activate the
appliance again, the display
shows the end of the
previous programme. Turn
the programme dial to set a
new cycle.
appliance drains the water and
spins.
appliance only drains the water
disappears.
ENGLISH 21
and the
.
the
the
and
goes