Table of Contents
Advertisement
Interior fittings
All variable parts of the appliance
can be taken out for cleaning.
Take out shelves in the door
Fig. '
Lift shelves upwards and take out.
Take out glass shelves
Fig. &
Pull the glass shelf forwards, lower
and swing out to the side.
Taking out glass shelf above vegetable
container
Fig. -
The glass shelf can be taken out and
disassembled for cleaning.
Note
Before taking out the glass shelf, pull out
vegetable container.
Drawers in the refrigerator
compartment
Fig. )
Pull out the drawer all the way, lift up
and remove.
To insert drawer, place the drawer on
the telescopic rails and push into
the appliance. Attach the drawer by
pressing it down.
Note
Before the vegetable drawer can be
taken out, the glass shelf above must be
taken out.
Taking out the frozen food container
Fig. $
Pull out the frozen food container all
the way, lift at the front and remove.
Light (LED)
Your appliance features a maintenance-
free LED light.
These lights may be repaired
by customer service or authorised
technicians only.
Tips for saving energy
Install the appliance in a dry, well
■
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
Do not block the ventilation openings
■
in the appliance.
Allow warm food and drinks to cool
■
down before placing in the appliance.
Thaw frozen food in the refrigerator
■
compartment and use the low
temperature of the frozen food to cool
refrigerated food.
Open the appliance as briefly as
■
possible.
Ensure that the freezer compartment
■
door is always closed properly.
To avoid increased power
■
consumption, occasionally clean the
back of the appliance.
The arrangement of the fittings does
■
not affect the energy rating of the
appliance.
en
17
Advertisement
Table of Contents
