Table of Contents
Advertisement
Read This First!
Make a backup of important
recorded data
JVC will not be responsible for any lost
data. It is recommended to copy your
important recorded data to a DVD or other
recording media for storage. (Z pg. 14)
Make a trial recording
Before the actual recording of important
data, make a trial recording and play back
the recorded data to check that the video
and sound have been recorded correctly.
We recommend you to use the same
recording media when performing both the
trial recording and the actual recording.
Reset the camcorder if it does
not operate correctly
Precautions on handling
batteries
•
Be sure to use the JVC BN-VF808U/
VF815U/VF823U battery packs.
•
If the camcorder is subjected to
electrostatic discharge, turn the power off
before using it again.
If a malfunction occurs,
stop using the camcorder
immediately and consult your
local JVC dealer
•
If a problem occurs when using the SD
card, take the card together with the
camcorder for repair. If one of them is not
included, the cause of the malfunction
cannot be diagnosed, and the camcorder
cannot be repaired.
•
Recorded data may be erased while the
camcorder is being repaired or inspected.
Back up all data before requesting repairs
or inspections.
How to Select an Item Using the
Touch Sensor
An example screen in English is used for the
guidance below.
E.g. Selecting an item from the menu list
R
(Z pg. 17)
Q Touch the MENU button.
R Slide your finger up and down on the
S Touch the OK button.
CAUTION
Touch the sensors with your finger. The
sensors do not function if you touch them with
your fingernail or with gloves on.
On-screen function guide
The on-screen function guide is displayed at
the bottom of the screen during menu display,
etc.
(on the menu screen)
MENU
SHUTTER MODE
IMAGE QUALITY
GAIN UP
BASIC SETTINGS
S
sensor.
EDITED COPY
CHANGE EVENT REG.
EDIT PLAYLIST
BASIC SETTINGS
CHANGE REGISTERED EVENT
Q
Advertisement
Table of Contents
