Samsung VR2AR7260W Manual page 11

Accessories
Remote controller
Power cord
✻ ✻ Accessories may differ depending on the models.
✻ ✻ Refer to page 17 for the installation of boundary markers.
✻ ✻ Battery Spec : Lithium-ion, 21.6V, 3600mAh, 12cell
✻ ✻ For VR2A726*** models, combo brush and soft action brush are provided.
Installation note
Note
f Install the docking station in a place where the floor and wall are level.
f It is best to install the docking station along the grain of wooden floors.
f If the emergency switch is off, the POWERbot will not charge even if it is docked on the
docking station.
f Always turn on the power of the docking station.
– If power is not supplied to the docking station, the POWERbot cannot find it and cannot
automatically recharge.
– If the POWERbot is left detached from the docking station, the battery will drain naturally.
f If the POWERbot is in sleep mode, power will not come on even if the emergency switch is
turned off and then on. Press and hold the [Start/Stop] button on the POWERbot to turn the
sleep mode off.
Batteries
(AAA type)
Battery charger Boundary markers Soft Action Brush /
User manual
ENGLISH-11
Spare filter Docking station
Combo Brush /
Brush cover Brush cover