Cleaning The Milk System; Cleaning The Brewing Unit - Siemens TI923309RW Instruction Manual

Hide thumbs Also See for TI923309RW:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
en Daily care and cleaning

Cleaning the milk system

The milk system is automatically
cleaned with a short jet of steam directly
after preparing a milk drink.
:
Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
Manually clean the milk system on a
weekly basis or more frequently if
required.For particularly thorough
cleaning, the milk system can be
additionally rinsed with water. ~ "Rinse
milk system" on page 28
Removing the milk system ~ Fig.#:
Remove the milk container from the
1.
appliance.
Slide the outlet system to the bottom
2.
position.
Press the unlocking mechanism at
3.
the top right.
Fold the cover down towards the
4.
front and remove.
Remove the milk system and
5.
dismantle into individual parts.
Clean the individual parts with
6.
detergent solution and a soft cloth
~ Fig. &.
Rinse all parts with clean water and
7.
leave to dry.
Notes
All parts of the milk system can be
cleaned in the dishwasher.
Detergent residues in the milk
system must be thoroughly removed
following the rinsing process.
Important: The outlet system cover
is not dishwasher-safe.
Inserting the milk system: ~ Fig. #:
Assemble the individual parts of the
1.
milk system.
Insert the milk system into the cover.
2.
Slide the outlet system to the bottom
3.
position.
Position the cover at the bottom and
4.
pivot it upwards until it engages.
26

Cleaning the brewing unit

~ Fig. $, ~ Fig. (
In addition to the automatic cleaning
programme, the brewing unit should be
removed regularly for cleaning.
Caution!
Clean the brewing unit without detergent
and do not put it in the dishwasher.
Remove the brewing unit:
Switch the appliance off.
1.
Remove the water tank.
2.
Slide both red locking sliders
3.
towards one another and remove the
cover.
Remove, clean and dry the coffee
4.
grounds slider (red) and the brewing
unit cover (red).
Slide the red lock to the right across
5.
the brewing unit.
Carefully remove the brewing unit
6.
and clean thoroughly under running
water.
Clean the interior of the appliance
7.
thoroughly with a damp cloth,
removing any coffee residues.
Allow the brewing unit and the
8.
interior of the appliance to dry.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ti924 seriesTi923 series

Table of Contents