LG T70SJBK1Z Owner's Manual page 26

• Press the WASH button to
select the desired timing.
• Press the RINSE button to
select the desired no. of
rinse cycles.
• Press the SPIN button till
No Spin Selection (Spin
Lamp off).
Press the WATER LEVEL button, to control the water level according to the
amount of laundry. If you do not specify the water level, then it will be
automatically selected, only after load detection. (Not applicable for only spin
process).
When
a RINSE, WASH/RINSE, WASH
off. If you wish to drain the water, press SPIN button after that press the START/PAUSE button and wait until the
water in the tub has drained completely.
• Press the RINSE button to
select the desired no. of
rinse cycles.
• Press the SPIN button to
select the desired time of
spin.
(Add detergent only where wash cycle is selected)
option is selected, after the wash is completed the water will not be drained
26
When you want to only
drain, press SPIN button.
Then press START/PAUSE
button.
Wait until the water in the
washing tub drains completely
and then press POWER button
to finish the activity.