Advertisement
Clearing DC offset error detection data (E2PROM data clearing)
Procedure
While pressing and holding [3] key and [6] key, reset-start.
Procedure
Press and hold the [3] and
[6] keys, and reset-start
1
1
2
2
This mode is cancelled by resetting. (The last screen will not be retained.)
FM/AM channel space switching
While Power OFF, press and hold [1] key and [5] key, and press [SRC] key to Power ON
Security (KDC-MP4036AX only)
• Forced Power ON mode
Procedure
While pressing and holding [B.BOOST] key and
[4] key, reset-start.
• How to register the security code on the "Car Audio Passport" after replacement of the FRONT-END (A1)
with E2PROM
While pressing and holding [1] key and [3] key, reset-start
Press the [B.BOOST] key
Press and hold [
] key for 1 second or longer
[FM] / [AM] / [
] / [
] key
Press and hold [
] key for 3 seconds or longer
[FM] / [AM] / [
] / [
] key
Press and hold [
] key for 3 seconds or longer
Reset, momentary power down, ACC OFF, Power OFF, panel removed
Note: The security code in this model cannot be all-clear.
TEST MODE
Display
D
C
E
R
R
D
C
O
K
D
C
1
E
R
R
D
C
1
O
K
D
C
1
O
K
D
C
2
4
D
C
2
0
Procedure
Procedure
KDC-MP3036/MP3036AX/MP336/MP336AX
KDC-MP336AXS/MP336S/MP4036AX
Entering DC offset error display mode.
When DC offset error is detected (when either one of capacitors is
leaking, or an improper connection or another error is detected)
When DC offset error is not detected (when none of capacitors leak,
no improper connection or other error is detected)
When improper connection or other DC offset errors are detected.
When improper connection or other DC offset errors are not detected.
When detecting improper connection or other DC offset errors, clears
detection data. (Clear E2PROM)
When detecting capacitor leak, provides information on the number
of capacitor leaks. (0~4)
When detecting capacitor leak, clears the number of capacitor leaks.
(Clear E2PROM)
FM200kHz/AM10kHz ↔ FM50kHz/AM9kHz
While "– – – –" is displayed, power can be turned ON for only 30 minutes.
After 30 minutes, can only be recovered by resetting.
Enters the test mode
Enters the MENU mode.
Enters the security registration mode.
Inputs the code. FM: Number up / AM: Number down /
Cursor to the left /
"RE-ENTER" is displayed.
Inputs the code again. FM: Number up / AM: Number down /
Cursor to the left /
"APPROVED" is displayed.
Cancels the test mode.
Note
Description
Note
Note
Description
Cursor to the right
Cursor to the right
15
Advertisement
