2.2
High-voltage capacitor
The high-voltage capacitor can be tested by 'ohmic' measurement'
(resistance measurement range 20 ΜΩ).
A correctly functioning capacitor indicates transient continuity.
The resistance then increases proportionally with the load.
A defective capacitor (e.g. short-circuit) indicates permanent
continuity.
The measuring instrument must indicate infinitely between the
connection and housing.
Page 5 of 23 pages
______________________________________________________________________________________________________________________________________________________________________________
Copyright by BSH Home Appliances Corporation
1901 Main Street, Suite 600, Irvine CA 92614
700_ 58300000192890_ARA_EN_A
800 444-9091
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.