Removing The Turntable Motor - Bosch HMC54151UC/01 Service Manual

3.3

Removing the turntable motor

1. Take the metal plate out of the appliance.
2. VERY CAREFULLY prise out the turntable shaft with a flat
screwdriver.
3. Place the appliance on its back.
4. Remove the cover from the turntable motor.
This cover has been punched into the base plate. It can easily be
removed with side cutters.
5. Disconnect the turntable motor.
6. Remove the screws which attach the turntable motor to the cooking
compartment.
7. After repairing or replacing the motor, screw the cover to the base
plate with a screw.
Page 11 of 23 pages
______________________________________________________________________________________________________________________________________________________________________________
Copyright by BSH Home Appliances Corporation 1901 Main Street, Suite 600, Irvine CA 92614 700_ 58300000192890_ARA_EN_A 800 444-9091
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.