Operation; Manual Operation; Setting The Clock; Setting The Timer - Bosch HMV 3061 U Use And Care Manual

Operation

Manual operation

Setting the clock

Setting the timer

Exhaust High / Low / Off

Surface Light / On / Off

Control Lock

14
Example: setting clock display for 9:00:
1. Touch Clock pad once or twice to select AM or PM.
2. Enter time using number pads.
3. Touch Clock pad again.
Example: setting timer for 5 minutes:
1. Touch Timer pad once.
2. Enter desired time using number pads.
3. Touch Timer pad.
When the timer has reached the end of set time, Πappears in the display and you
will hear permanent beep alerts indicating the timer has run out.
To stop the beep, touch Timer pad.
The exhaust ventilation moves steam and other cooking vapors from the cooking
surface of the range below the microwave oven.
To operate the exhaust vent, Touch the Exhaust High/Low/Off pad once for the
highest speed setting. Touch the pad again to choose the Low speed setting and a
3rd time to turn the exhaust ventilation off.
Note: If the temperature gets too hot around the microwave oven, the fan in the
exhaust vent hood will automatically turn on at the LOW setting to cool the oven.
The fan will automatically turn off when the internal parts are cool. When this occurs,
the vent cannot be turned off.
Touch the Surface Light/On/Off pad once for a cooking surface light. Press the
pad again to turn the light off.
You may lock the control panel to prevent the microwave from being accidentally
started or used by children.
The control lock feature is very useful when cleaning the control panel. The lock will
prevent accidental programming when wiping the control panel clean.
Example: to set the control lock ON:
Touch and hold the Stop/Cancel pad for more than 3 seconds. The Lock icon will
appear in the display window along with 2 beeps.