Operation And Controls - Essick 3D6 100 Owner's Care & Use Manual

Evaporative 4-speed with removable water bottles automatic humidistat

Hide thumbs Also See for 3D6 100:

Figure A : 3D6 100 Assembly and Wick Placement

Make sure wicks are resting all the way into the water channel as indicated

by the illustrations.

Figure B: Water Bottle Filling

Return each bottle to its upright position using the handle on the top of the

bottle. Set each bottle in its recessed area, the top of the bottle flush with

the top of the humidifier. When positioned properly, the valve will open and

water will flow into the water channel.

We recommend using Essick Air Bacteriostat Treatment, P/N 1970

whenever you refill the humidifier reservoir to eliminate bacterial growth.

Add bacteriostat according to the instructions on the bottle.

Plug cord into wall receptacle and turn humidifier on.

**When excessive condensation exists, a lower speed setting is

recommended.

CAUTION: Disconnect power before filling, cleaning or servicing unit. Keep

grille dry at all times.

OPERATION & CONTROLS

The humidifier should be placed at least FOUR inches away from any walls and

away from heat registers. Do not place on soft carpet. Unrestricted airflow into

the unit will result in the best efficiency and performance.

WATER CAP

Table of Contents