Table of Contents
Advertisement
Mode
4
4 : 3
4 : 3
4
Zoom
4
16 : 9
4
Just
4
For an elongated image
Panasonic
4
Auto
For a 4:3 image
Notes:
(1) Do not allow 4:3 mode to be displayed for an extended period, as this can cause a permanent after-image to remain
on the Plasma Display Panel.
(2) The S Video terminal on this set can detect specially encoded signals that are compatible with a wide screen
monitor. When a full image from the S Video terminal of specially encoded video is detected by the set, the screen
size is automatically set to 16:9 mode.
Picture
3
16
Zoom
3
16
16 : 9
3
16
Just
3
16
Panasonic Auto
3
Image is expanded
Changes in accordance
with the Panasonic Auto
3
mode setting (see page
35)
4:3 will display a 4:3 picture at its standard 4:3 size.
Zoom mode magnifies the central section of the
picture.
9
16:9 will display the picture at its maximum size but
with sight elongation.
9
Just mode will display a 4:3 picture at its maximum
size but with aspect correction applied to the center
of the screen so that elongation is only apparent at
9
the left and right edges of the screen. The size of
the picture will depend on the original signal.
The display will automatically become enlarged
(depending on the picture source), allowing you to
view the picture at its maximum size.
9
Note:
Panasonic Auto mode is designed to automatically
adjust the aspect ratio to handle a mix of 16:9 and
4:3 program material. Certain 4:3 program material,
such as stock market data screens, may
occasionally cause the image size to change
unexpectedly. When viewing such programs, it is
recommended that the ASPECT be set to 4:3.
ASPECT Controls
Explanation
21
Advertisement
Table of Contents
