Table of Contents
Advertisement
Operation
Fan
On/Off
Light
The light can be switched on and off
independently of the fan.
To adjust the luminosity, hold down the
button until the required luminosity is obtained.
Switching the acoustic signal off and on
When a button is pressed, an
acknowledgement signal sounds.
To switch off the acoustic signal,
simultaneously press the 0 and
approx. 3 seconds. An acknowledgement signal
sounds.
To switch on the acoustic signal, repeat the
process.
Locking the buttons
To lock the buttons, simultaneously press 0
q
and
.
The buttons are locked for approx. 30 seconds.
To release the buttons early, repeat the
process.
10
Fan settings
0
p
buttons for
Intensive
Grease filter saturation
setting
display
Fan run-on
Indirect lighting
RISK OF INJURY
Halogen bulbs become very hot when
switched on. Even some time after the
appliance has been switched off, there is still a
risk of burns!
Caution when pressing the switch for the
indirect lighting.
Do not touch the hot halogen bulbs!
1 The indirect lighting is on permanently.
0 Off
2 The indirect lighting is switched on and off
together with the hotplate lighting.
Light
1
0
2
Advertisement
Table of Contents
