Clock Functions - AEG 944187820 User Manual

12 www.aeg.com

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
Time of Day
Minute Minder
Count Up Timer
7.2 How to set: Time of day
After the first connection to the mains,
wait until the display shows: hr, 12:00.
12 - flashes.
Step 1
Step 2
Step 3
Step 4
- press repeatedly to change the time of day.
Duration
End Time
Time Delay
00:00
, - press to set the hour.
- press to confirm.
The display shows the set hour and: min. 00 - flashes.
, - press to set the minutes.
- press to confirm.
The display shows the set time.
Application
To show or change the time of day. You can change
the time of day only when the oven is off.
To set the length of cooking. Use only when a heating
function is set.
To set the oven turn-off time. Use only when a heating
function is set.
Combination of functions: Duration, End Time.
To set a countdown time. This function has no effect on
the operation of the oven.
Minute Minder - can be set at any time, also if the oven
is off.
If you do not set any other clock function the function
automatically monitors how long the oven works.
Counting starts immediately when the oven starts to
heat.
Count Up Timer cannot be used with the functions: Du‐
ration, End Time.
- flashes in the display.