Brother P-touch E110VP User Manual page 17

 What to do when

Problem
The display • Check that the batteries are
remains correctly installed. See the
blank after Installing Power Supply and
you have Tape Cassette section.
turned on
• The batteries may be weak.
the P-touch
Replace them.
labelling
• Check that the AD-24ES Adapter
machine.
is correctly connected.
When the
label is
printed, See the Setting Margins section in
there is too this guide and select [Half],
much [Narrow] or [Chain Print]
margin to have smaller margins for your
(space) on labels.
both sides
of the text.
The P-touch
labelling
machine
• Check that the cassette is inserted
does not
correctly.
print, or the
• If the cassette is empty, replace it.
printed
• Check that the Tape Cassette
characters
Cover is closed correctly.
are not
formed
properly.
The setting • The batteries may be weak.
has cleared Replace them.
on its own.
• When power is disconnected for
more than three minutes, all text
and formats in the display settings
are cleared.
A blank There may be some dust on the
horizontal Print Head. Remove the cassette
line and use a dry cotton swab to gently
appears wipe the Print Head with an up-and-
through the down motion. See the Installing
printed Power Supply and Tape Cassette
tape. section for the Print Head location.
Solution Problem
The P-touch
labelling
machine
has "locked
up" (nothing
happens
For more information, see the
when a key
Resetting the P-touch Labelling
is pressed,
Machine section.
even
though the
P-touch
labelling
machine is
on.)
The power • The batteries may be weak.
turns off Replace them.
when you
• Check that the batteries are
try to print.
correctly inserted.
• The wrong AC Adapter is used.
We recommend using the
AD-24ES Adapter.
The tape
• Check that the end of the tape
does not
feeds under the tape guides.
feed
For more information, see the
correctly or
Installing Power Supply and
the tape
Tape Cassette section.
gets stuck
inside the
• The Cutter Lever was pressed
P-touch
while printing. Do not touch the
labelling
Cutter Lever during printing.
machine.
To change
For more information, see the
language
Initial Settings section.
setting.
Solution