GE 2-8111AH User Manual page 13

between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key
once for the letter M; press the 4 key  times for the letter I; press the 8 key for the letter T;
press the 4 key twice for the letter H.
NOTE: If you make a mistake, use the del/conf/intercom button to
backspace and delete one character at a time.
4. Press the menu ok/mute button to save your name. You will hear a confirmation tone and
the handset name shows in the display.
Ringer Tone
You may choose from ten different ringer tones and ten different melodies.
From the Handset Setup Menu:
1. Press the vol/CID ( 6 or 5) button to scroll to the RINGER TONE sub-menu.
. Press the menu ok/mute button to enter the menu. SET RINGER TONE 01 shows in the
display. The default setting is 01.
. Use the vol/CID ( 6 or 5) button to scroll to the desired setting (1 through 0). You will hear
a sample of the ringer tone/melody you select.
4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone
and the selected ringer tone shows in the display.
NOTE: You must have the Ringer Volume set to ON for ring tone to signal
an incoming call.
Ringer Volume
From the Handset Setup Menu:
1. Press the vol/CID ( 6 or 5) button to scroll to the RINGER VOLUME sub-menu.
. Press the menu ok/mute button to enter the menu. SET RINGER 41HI 2LO 3OFF shows in
the display. The default setting is HI.
. Use the touch tone pad on the handset to select 1,  or , or use the vol/CID
( 6 or 5) button to scroll to your selection. HI is the default setting.
4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone
and the new volume setting shows in the display.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.
Shortcut to the ringer volume function:
1. Make sure the phone is OFF (not in talk mode).
1