Philips Lumea BRI861/00 Manual page 38

38
English
Problem
The device
produces a
strange smell.
The skin feels
more sensitive
than usual during
treatment. I
experience an
unacceptable
pain sensation
when I use the
device.
Possible cause
The light exit
window or the skin
tone sensor is dirty.
You have not
removed the hairs
on the area to be
treated properly.
These hairs may
get burned and can
cause the smell.
The light intensity
setting you use is
too high.
You did not remove
the hairs on the
areas to be treated.
The UV filter of the
light exit window is
broken.
You treated an area
for which the
device is not
intended.
Solution
Clean the light exit window
and the skin tone
sensor carefully.
Pretreat your skin before
you use Lumea.
Check if you have selected
the right light intensity
setting. If necessary, select
a lower setting.
Pretreat your skin before
you use Lumea.
If the UV filter is broken, do
not use the device
anymore. Contact the
Consumer Care Center in
your country, your Philips
dealer or a Philips service
center.
Never use the device on
the following areas: inner
labia, anus, nipples,
areolas, lips, moles,
freckles, tattoos,
piercings. inside the nostrils
and ears, around the eyes
and near the eyebrows.
Men must not use it on the
face, neck or on the
scrotum.