Download Print this page
Steve Silver CV500SG Manual
Hide thumbs Also See for CV500SG:

Advertisement

Quick Links

Your furniture purchase is an investment. Here are a few tips to maximize the lifetime of your furniture with a
minimal amount of effort. Properly caring for your furniture can help ensure that it looks great year after year.
Wood Furniture Maintenance:
-
Always dust, wipe, and clean with the grain of
the wood.
-
Dust with a soft cloth. Dust will scratch the
furniture surface if not removed properly.
-
If a polished surface becomes foggy, rub it with a
cloth dipped in a solution of one tablespoon
vinegar to one quart of water. Rub softly with the
grain until the surface is completely dry.
-
Soap and water are not advisable for wood
surfaces. Water can penetrate the finish and raise
the grain on wood, causing damage.
-
Remember to change dusting cloths frequently as
dirty cloths may scratch your furniture's surface.
The Enemies of Wood:
-
Moisture is wood's worst enemy. Liquid spills
should be gently wiped up immediately. Coasters
should be used under all beverages.
-
Do not allow rubber or vinyl materials to lie on
the furniture. Chemicals in rubber may leave a
stain. Put a strip of felt or leather under
accessories that have rubber or vinyl.
-
Heat creates a chemical change in the furniture's
finish, which result in a white spot. Use
protective pads under hot dishes, appliances, etc.
-
Sunlight's ultraviolet rays can damage the finish
of furniture. Do not place furniture directly
against a heater or radiator and do not place in
the path of hot streams of air from central heating.
This will cause extreme localized drying of the
wood.
ITEM#: CV500SG
Canova Side Chair
19.5'' x 24.5" x38''H
Marble Top Maintenance:
The surface of the marble on your table has been
polished and sealed to create a generally non-porous
surface. The stone has many natural characteristics
including veining, hairline cracks, and color variations,
which make up the stone's beauty.
To maintain the beauty of your marble:
-
Protect surfaces from scratching, staining and
etching by:
Keeping them free of debris or sharp
objects.
Wiping up spills immediately
Avoiding contact with chemicals
(particularly acid-based materials)
-
Clean with PH neutral products or those
especially formulated for use on stone.
-
It is not recommended to use a water-based
solvent for dark marble as it will remove the
polish from the surface.
Caring for the Fabric on Upholstered Furniture:
-
Frequent vacuuming of the entire upholstered
area will prevent dust from settling into the
fibers.
-
Professional cleaning is always recommended
for all upholstered pieces.
-
Do not use cleaning products containing
brightening agents.

Advertisement

loading
Need help?

Need help?

Do you have a question about the CV500SG and is the answer not in the manual?

Questions and answers

Summary of Contents for Steve Silver CV500SG

  • Page 1 ITEM#: CV500SG Canova Side Chair 19.5'' x 24.5“ x38''H Your furniture purchase is an investment. Here are a few tips to maximize the lifetime of your furniture with a minimal amount of effort. Properly caring for your furniture can help ensure that it looks great year after year.
  • Page 2: Assembly Instruction

    CV500SG ASSEMBLY INSTRUCTION Do not fully tighten screws & bolts until the entire item is completely assembled STEP:1 STEP:2 STEP:3 STEP:4...
  • Page 3: Hardware Pack

    Hardware Pack# : PCV500SGH Ø5/16" 4 PCS 3–1/4" × 4 PCS Ø5/16" 2-1/4" × Ø5/16"×1-1/2" 3 PCS Ø5/16" 11 PCS 11 PCS Ø5/16" Ø 12mm...
  • Page 4: Product Details

    PARTS FOR CV500SG CV500SG Complete Hardware#: PCV500SGH PCV500SGB Chair Back PCV500SGSC Seat cushion PCV500SGSF Seat Frame PCV500SGL PCV500SGLEV Leveler PRODUCT DETAILS WHITE VERTEBRAL WOOD+FABRIC+FOAM CHAIR BACK MDF+FABRIC+FOAM SEAT CUSHION WHITE VERTEBRAL WOOD LEG / SEAT FRAME LEVELER PLASTIC+ IRON 19"...
  • Page 5 Steve Silver Company Dining Chairs Assembly Troubleshooting Guide The most important element of correct chair assembly is to tighten the bolts as directed. Prematurely tightening the bolts can lead to numerous issues and will lengthen the assembly time. Listed below are the most common issues in chair assembly and their easy solutions.