Using Smart Diagnosis - LG GC-B459NL Owner's Manual

Settings
Allows you to set various options on the refrigerator and
in the application.
NOTE
• If you change your wireless router, Internet service
provider, or password, delete the registered appliance
from the LG SmartThinQ application and register it
again.
• The application is subject to change for appliance
improvement purposes without notice to users.
• Functions may vary by model.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping,
and handling) upon email request to opensource@lge.
com. This offer is valid for a period of three years after
our last shipment of this product. This offer is valid to
anyone in receipt of this information.

Using Smart Diagnosis™

c
• For appliances with the
Smart Diagnosis™ Through the
Customer Information Centre
Use this function if you need an accurate diagnosis by
an LG Electronics customer information centre when the
appliance malfunctions or fails. Use this function only
to contact the service representative, not during normal
operation.
Display panel is on the Fridge door
1
Press the Lock button to activate the lock function.
• If the display has been locked for over 5 minutes,
you must deactivate the lock and then reactivate
it.
2
Press and hold the Freezer button for three
seconds or longer while continuing to hold your
phone to the speaker.
d
or logo
3
Open the fridge door and then hold the phone on
the upper left speaker.
4
After the data transfer is complete, the service agent
will explain the result of the Smart Diagnosis™.
Display panel is inside the Fridge
door
1
Open the fridge door.
2
Press the Eco Friendly button.
• If the door has been open for longer than 60
seconds, close the door and repeat steps 1 and
2.
3
Hold the phone on the upper left speaker.
4
Press and hold the Freezer button for 3 seconds
while holding your phone in front of the speaker.
5
After the data transfer is complete, the service agent
will explain the result of the Smart Diagnosis™.
EN
21