Preview The Camera - Sricam SP006 User Manual

1. No IP Cameras found within LAN. After about 1 minute search, the Equipments List Field
not show the IP address.
2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the total
number is displayed in the Equipments list field as shown in Figure 2.1
Note：
1. Current Computer indicates the Computer's IP Address information.
2. Equipment information indicates the IP camera's IP Address information.
3. If you find that the camera's "Subnet Mask", "Gateway", "DNS Server" is not as some
as your current computer's, ( Figure 2.2) . You need try to change the camra's IP address.
Make sure the "Subnet Mask", "Gateway", "DNS Server" is the same as your router's or your
current computer's.
4. If you don't know how to configure your camera's IP address. You can click
" " button. The Search Tool software can help you configure a usable IP
camera automatically.

2.1.2 Preview the camera.

You can preview the camera via the P2P ID Finder software. (Before Preview the camera,
you must install
1) Select the camera which you want to view.
2) Click Video Preview.
3) Sign in the user name and password of the camera.
4) Click connect
Then you can view the camera video now.
Figure 2.2
IPCam ActiveX.exe software.)
.
6