Stereo And Bilingual Transmissions (For Dtv Programmes) - Toshiba 40L555 Series Owner's Manual

Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
From the PICTURE menu, press  or  to
select 3D Colour Management.
2
Press  or  to select On.
3D Colour Management
3
Press  or  to select Base Colour
Adjustment.
4
Press OK, then press  or  to select an item
you want to adjust.
Base Colour Adjustment
Hue
Red 0
0
Green
Blue
0
Yellow 0
Magenta 0
Cyan
0
Reset
5
Press , then press  or  to select Hue,
Saturation or Brightness.
6
Press  or  to adjust the settings as required.
Hue
Red 0
NOTE:
If you select 3D Colour Management Off mode, this
mode is not available.
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu, press
 or  to select Reset.
2
Press OK.
3
A confi rmation message will appear. Press  or
 to select Yes, and then press OK.
405055L5550Series̲EEEV̲En.indd 23 405055L5550Series̲EEEV̲En.indd 23
Using the TV's features
On
Saturation Brightness
0 0
0 0
0 0
0 0
0 0
0 0
Saturation Brightness
0 0
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
• This function cannot be selected in the following
cases.
• When the input source is PC.
• When Intelligent Scene Optimiser is set to
Game.
• When Picture Mode is set to Intelligent
AutoView.
1
From the PICTURE menu, press  or  to
select Active Backlight Control.
2
Press  or  to select On or Off .
Using the Picture Analyser
Displays the picture histogram.
1
From the PICTURE menu, press  or  to
select Picture Analyser.
Histogram: Shows the bright and dark areas of
the displayed picture, and the distribution of
colours in a graph.
Contrast Curve: Shows the correction curve,
which improves the expressive feel of the
displayed picture, in a graph.
To close the Picture Analyser screen, press
EXIT.
Stereo and Bilingual transmissions
(for DTV programmes)
For stereo or dual mono broadcasts, press s and
use  or  to select settings.
Mode Display
d Stereo Stereo S Left S Right
j Dual mono Dual 1 S Dual 2 S Dual
e Mono
Surround
For multi-audio track broadcasts, press s
repeatedly to change the audio language (- page
32).
Pressing 
–
–
23
27/05/18 13:14:57 27/05/18 13:14:57