Page 1
NOTE; PERSONAL AND CUSTOM PREFRERENCES WILL BE LOST UPON COMPLETION OF THIS FIRMWARE UPDATE. PLAEAE MAKE NOTE OF ANY PREFERENCE SETTINGS PRIOR TO STARTING THIS FIRMWRE UPDATE. How to upgrade the Software Remove AC power from set by unplugging the AC power cord with viewing the TV. The USB reader is located on the left or right of the cabinet near the side control/jack assembly as shown in Figure 1.
Page 2
Plug the TV back into AC power. The Software upgrading process will begin. During the Software upgrade, the TV receiver will display “Software upgrade in progress” as shown in Figure3. Software upgrade in progress. Please wait … DO NOT unplug your TV! Doing so may corrupt the system making your TV inoperable.