Table of Contents
Advertisement
Available languages
Available languages
36
Noises
5.
Unscrew the pin of the upper hinge and
install it on the opposite side.
6.
Install the door in the upper hinge.
7.
Install the ventilation grille, clipping it
into place.
8.
Unscrew the handle. Remove the plug
with a punch. Install the handle and the
plug on opposite side. Take from the ac-
cessory bag the two plugs and cover the
holes left open after having removed
the handle.
9.
Make sure that the front board of the
door is parallel to the front board of the
top.
10. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket.
NOISES
There are some sounds during normal running (compressor, refrigerant circulation).
OK
HISSS!
180°
BRRR!
Advertisement
Table of Contents
