Table of Contents
Advertisement
6 Adjust sound
The following operations are applicable to all
supported media.
Select a preset sound e ect
• Press SOUND repeatedly to select a preset sound
e ect.
Adjust volume level
• On the remote control, press
repeatedly.
Mute sound
• Press
to mute or unmute the sound.
7 Other features
Set the alarm timer
This product can be used as an alarm clock.
Note
• Alarm timer is not available in AUDIO IN mode.
1. Make sure that you have set the clock.
2. In standby, press and hold
seconds.
- The hour digits blink.
3.Press
/
repeatedly to set the hour, and then
press
to con rm.
- The minute digits blink.
4. Press
/
to set the minute, and then press
to con rm.
- The last selected alarm source blinks.
5. Press
/
to select an alarm source (FM or
DAB+ radio, BT, Buzzer), and then press
con rm.
- XX blinks (XX indicates the volume level of alarm).
6. Press
/
to set the alarm volume, and then
press
to con rm.
Activate/deactivate alarm timer
In standby mode, press
deactivate timer.
- If timer is activated, TIMER is displayed.
• In standby, you may press and hold
clock display on or o .
10 EN
/
(volume)
for more than 2
to
repeatedly to activate or
to toggle
Set the sleep timer
This music system can switch to standby automati-
cally after a set period of time.
• When the music system is turned on, press
repeatedly to select a set period of time (in
minutes).
- When sleep timer is activated,
To deactivate sleep timer
• Press
repeatedly until (sleep off) is displayed.
- When sleep timer is deactivated,
Listen to an external device
You can listen to an external device through this
unit with an MP3 link cable.
1. Connect an MP3 link cable (not supplied)
between:
• AUX IN jack (3.5 mm) on the product,
• and the headphone jack on an external device.
2. Press AUX IN repeatedly to select AUDIO IN
source.
3. Start to play the device (see the device user
manual).
is displayed.
disappears.
Advertisement
Table of Contents
