Turning The Tv On; Tuning The Tv For The Fi Rst Time - Toshiba 32P2300 Series Owner's Manual

Notes:
• Some PC models cannot be connected to this TV.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
• There is no need to use an adapter for computers
with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left
side of the screen, or parts of the picture may be
obscured depending on some signals. This is not the
malfunction.
• If the edges of the picture are stretched, readjust the
picture position adjustments in the PC Settings
menu.
• Depending on the specifi cation of the PC you are
playing the DVD-Video on, and the DVD's title, some
scenes may be skipped, or you may not be able to
pause during multi-angle scenes.
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
Pin No. Signal name
1 R
2 G
3 B
4 NC (not
connected)
5 NC
6 Ground
7 Ground
8 Ground
• Most of the picture/sound controls and functions
are available. However features not available will
be greyed out.

Turning the TV on

Switching on the TV
Connect the power cord to a wall outlet, the
! power indicator lights in red (standby mode).
1
Press 1 on the remote control or ! on the TV
left side panel, the ! power indicator lights
in green.
Note:
If you watch black and white programmes when the
Colour System mode is set to "A" (Automatic), colour
noise may appear on the screen. In this case select the
appropriate Colour System (For the system of each
country or region, refer to pages 10, 29).
32P2300Series̲EN.indd 9 32P2300Series̲EN.indd 9
Pin No. Signal name
9 NC
10 Ground
11 NC
12 DDC Data
13 H-sync
14 V-sync
15 DDC Clock
– 9 –
Switching off the TV
1
Press 1 on the remote control or ! on the TV
left side panel to switch to the standby mode.
Notes:
• When the TV will not be used for a long period of
time, such as during vacation or travel, remove the
power plug from the wall outlet.
• The TV will automatically turn off in 15 minutes
based on No Signal Power Down settings (-
page 16) if no signal is detected.
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power
is going to be off for a long time and you are going
to be away from your TV, unplug the power cord to
prevent the TV from turning on in your absence.

Tuning the TV for the fi rst time

Before switching on the TV, put your decoder and
media recorder to standby, if they are connected,
and ensure that the aerial is connected. To setup
the TV, use the buttons on the remote control as
detailed on page 7.
1
Press the 1 button. The Quick Setup screen
will appear. This screen will appear the fi rst time
that the TV is switched on.
Quick Setup
Menu Language
2
Press  or  to select the menu language .
3
Press OK, to display the Location menu.
Press  or  to select Store or Home. For
normal home use, select Home.
You can select either Home or Store mode.
Home is recommended for normal home use.
Select Store when using a TV for displaying in
a shop, etc.
Location
To use the TV for displaying in a store showroom, please select
[Store]. [Home] mode is recommended for normal use.
Home
Store mode:
• A confi rmation menu will appear.
• AutoView menu is not available.
English
2013/03/19 19:43:40 2013/03/19 19:43:40