Advertisement
15
ADDITIONAL WASH OPTIONS
Prewash Function
The Prewash function adds an additional wash prior to the
main wash. Extra detergent should be placed in the
Pre-wash detergent compartment, labeled with "I".
Speed Wash Function
Adding this function to your wash program decreases the
washing time.
To activate the Speed Wash Function:
•
Select your desired washing program.
•
Press the "Speed Wash" button.
•
Press the "Start/Pause" button to begin the program.
Extra Rinse Function
The laundry will undergo an extra rinse cycle at the
completion of the program.
Delay Function
The Delay function can be set with this button, where the
delay is 0-24 Hrs.
To set the Delay function:
•
Select a wash program;
•
Press the Delay button to choose the time;
•
Press Start/Pause to commence the delay operation.
To Cancel the Delay function:
•
Press the Delay button until the display shows 0H. It
should be pressed prior to starting the program. If the
program has already started, press the On/Off button
to reset.
Reload (Add a Garment) Function
This function can be executed during operation of a
washing program. When the drum of the machine is still in
motion and/or there is a large amount of water inside, the
machine will not allow the door to be opened.
To use the Reload function:
•
Press and hold the Start/Pause button for 3 seconds.
•
Once the drum stops rotating, the door will unlock and
allow you to open.
•
Add your additional clothing items and close the door.
•
Press the Start/Pause button once again to continue the
wash program.
esatto.house
Child Lock
To avoid the washing procedure being altered by children,
you can activate the child lock function. All buttons and
dials won't alter the machines settings, however the On/Off
button will still function.
Note:
If the machine is switched off when Child Lock is active, it
will remain in Child Lock mode when switched back on.
To activate or deactivate the Child Lock:
•
Press and hold the "Rinse" and "Pre Wash" buttons
together at the same time for 3 seconds, whilst the
machine is operating.
•
The machine will make an audible tone to let you know
that the Child Lock is activated or deactivated.
Note:
At the completion of a wash program, the child lock will
become deactivated automatically.
Bubble Removal Function
When excessive detergent is used, excessive bubbles may
occur, effecting your wash results. Your washing machine
will automatically check for excessive bubbles and work to
remove them as required.
Muting the machine (Signal function)
This function allows you to turn the audible tone on or off, to
indicate that your washing program is complete. By default
the audible signal is set to On.
When the Signal function is on, your appliance will make an
audible tone when:
•
The extra function buttons are pressed
(i.e. Speed Wash, Anti-Crease).
•
If the washing machine is operating and the program
selector knob is turned, the appliance will make an
audible tone to alert the user that an invalid choice
has been made.
•
At the completion of a washing program, an audible
tone will sound.
To activate or deactivate the Signal function:
•
Press and hold the "Extra Rinse" and "Pre Wash" buttons
together for 3 seconds.
Advertisement
