Table of Contents
Advertisement
○
1
. Loosen the screws of the bottom of
the chassis.
○
4
Connect the HDD cable and power
cable to the HDD and the mainboard
respectively.
2.3 MINI 1U, COMPACT 1U, 1U
For the first time to install, please check the HDD has been installed or not.
Refer to the user manual for HDD space information and recommended HDD brand. Please use HDD of
7200rpm or higher. Usually we do not recommend the PC HDD.
①
Loosen the screws of the
upper cover and side panel.
④
Place the HDD in accordance
with the four holes on the bottom
of the chassis.
○
2
Place the HDD in
accordance with the four holes
in the bottom.
○
5
Put the cover back and then
fix the screws of the rear panel.
The installation is complete.
②
Connect the one end of the
HDD data cable and the power
cable to the mainboard.
⑤
Turn the device upside down; fix
the screws to secure the HDD on
the bottom of the chassis.
○
3
Turn the device upside
down and then secure the
screws firmly.
③
Connect the other end of the
HDD data cable and the power
cable to the HDD.
⑥
Put the cover in accordance
with the clip and then fix the
screws on the rear panel and
side panel.
3
Advertisement
Table of Contents
