Setup; Setting Up The Printer - zenpert 4T520P Series User Manual

3. Setup

3.1 Setting up the Printer


Place the printer on a flat, secure surface, then follow the steps below:
1. Plug the power cord into the AC power cord socket at the rear of the printer. Then, plug the other
side into a properly grounded power outlet.
2. Connect the printer to the computer with the provided USB cable.
3. Push the power switch on "-" side to open the power of printer.
4. If you would like to watch printer installation videos or download the firmware and software, please
scan the QR code as below for more information.
Note:
* Please switch OFF printer power switch prior to plugging in the power cord to printer power
jack.
* The interface picture here is for reference only. Please refer to the product specification for
the interfaces availability.

7
