Table of Contents
Advertisement
> Before Start
> Part Names
a Speaker Cable
> Install
> Initial Setup
a
ZONE SPEAKER
> Playback
> Advanced Manual
Troubleshooting | Supplementary Information, etc.
7. Multi-zone Connection-3 (ZONE
SPEAKER)
You can enjoy 2ch audio in the separate room by, for
example, playing a Blu-ray Disc player in the main room
(where this unit is located) and listening to internet radio
through the speakers in the separate room (ZONE 2).
0 You cannot use ZONE SPEAKER if you have connected
the front speakers using Bi-Amping connection or if you
have connected a Speaker B System.
0 No sound is played from the height speakers when
playing audio from ZONE SPEAKER.
0 DSD and Dolby TrueHD audio signals are not output to
ZONE 2 when selected with the "NET" or "USB" input
selector.
Connections with an AV component
Connect with HDMI IN 1 to 3 if you want to output an
MAIN ROOM
external AV component to ZONE 2. If the AV component
doesn't have an HDMI jack, connect using a digital optical
cable, digital coaxial cable, or analog audio cable. If any of
these are already used, you do not have to connect using
ZONE2
any of the others.
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" (P26) to enjoy this feature.
0 The audio from externally connected AV
components can only be output when the audio is
analog or 2ch PCM audio signals. If you have
connected to this unit with an HDMI cable or
digital optical/coaxial cable, may be necessary to
convert the audio output of the AV component to
PCM output.
En
23
Advertisement
Chapters
Table of Contents
