GE PSE26KGEWW Owner's Manual And Installation page 39

Problem
Frequent "buzzing" sound
Ice cubes have odor/taste
Small or hollow cubes
Slow ice cube freezing
Cube dispenser
does not work
Water has poor taste/odor Water dispenser has not been
Water in first glass
is warm
Water dispenser
does not work
Water spurting from
dispenser
Water is not dispensed
but ice maker is working
No water or ice cube
production
CUBED ice was selected but
CRUSHED ice was dispensed
Possible Causes
Ice maker power switch is in the
I (on) position, but the water supply
to the refrigerator has not been
connected.
Ice storage bin needs cleaning.
Food transmitting odor/taste
to ice cubes.
Interior of refrigerator
needs cleaning.
Water filter clogged.
Door left open.
Temperature control not set
cold enough.
Ice maker turned off or
water supply turned off.
An item is blocking or has fallen
into the ice chute inside the
top door bin of the freezer.
Ice cubes are frozen to
ice maker feeler arm.
Irregular ice clumps in
storage container.
Dispenser is LOCKED.
used for a long time.
Normal when refrigerator
is first installed.
Water dispenser has not been
used for a long time.
Water system has been drained.
Water supply line turned
off or not connected.
Water filter clogged.
Air may be trapped in the water system.
Dispenser is LOCKED.
Newly-installed filter cartridge.
Water in reservoir is
frozen.
Refrigerator control setting
is too cold.
Supply line or shutoff valve is clogged.
Water filter clogged.
Dispenser is LOCKED.
Last setting was CRUSHED.
What To Do
the I (on) position will damage the water valve.
Care and cleaning.
About the controls.
the chute.
colder setting, one position at a time, until clumps do not form.
LOCK or LOCK CONTROLS pad for 3 seconds.
water in system is replenished.
Installing the water line.
LOCK or LOCK CONTROLS pad for 3 seconds.
(about one and a half gallons).
LOCK or LOCK CONTROLS pad for 3 seconds.
setting. This is normal.
GEAppliances.com
O (off) position. Keeping it in
39