GE PSE26KGEWW Owner's Manual And Installation page 33

REPLACE THE BASE GRILLE
7
Replace the grille by installing the two Phillips
head screws.
SET THE CONTROLS
8
Set the controls to the recommended setting.
Installation Instructions
33
START THE Ice maker
9
Set the ice maker power switch to the
I (on) position. The ice maker will not begin
to operate until it reaches its operating
temperature of 15°F (–9°C) or below. It will then
begin operation automatically. It will take 2–3
days to fill the ice bin.
Power
switch
Power
switch
NOTE:
In lower water pressure conditions, the water
valve may turn on up to 3 times to deliver
enough water to the ice maker.