Removing And Installing Hardware; Vertical Stand; Computer Cover - Lenovo ThinkCentre M75s Gen2 Hardware Maintenance Manual

29
System fan connector
31
Cover presence switch connector

Removing and installing hardware

This section provides instructions on how to remove and install hardware for your computer. You can expand
the capabilities of your computer and maintain your computer by removing or installing hardware.
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Important safety information" on page 1.

Vertical stand

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
For access, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables from the computer.
Removal steps

Computer cover

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
56
M75s Gen 2 Hardware Maintenance Manual
30
E-lock connector