Table of Contents
Advertisement
Microprocessor
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
CAUTION:
The heat sink and microprocessor might be very hot. Before you open the computer cover, turn off the
computer and wait several minutes until the computer is cool.
For access, remove the following parts in order, if any:
• "Computer cover" on page 56
• "Optical drive" on page 58
• "Heat sink and fan assembly" on page 77
Notes:
• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept
as clean as possible.
78
M75s Gen 2 Hardware Maintenance Manual
Advertisement
Table of Contents
