LG MDD-D102A Owner's Manual page 13

MDD102_62_A0U_ENG_TASHKENT
Before Operation
DISPLAY
TV Aspect
4:3 – Select when a standard 4:3 TV is connected.
16:9 – Select when a 16:9 wide TV is connected.
Display Mode
The display Mode setting works only when the TV
Aspect mode is set to "4:3".
Letterbox – Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan – Automatically displays the wide picture on
the entire screen and cuts off the portions
that do not fit.
3/16/07 9:07 AM Page 13
Progressive Scan
Progressive Scan Video provides the highest quality pic-
tures with less flickering.
When you are using the COMPONENT VIDEO OUT
jacks, but are connecting the unit to a standard (analog)
television, set Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
o Turn ON progressive scan:
T
Connect component out of the unit to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select "Progressive Scan" on the DISPLAY menu
then press .
2. Select "On" using the /
3. Pressing SELECT/ENTER will set the player to
Progressive scan mode.
Caution
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to on in error, you must reset the unit. First, remove the
disc in the unit. Next, press STOP(x) on the remote
control and hold it for five seconds before releasing it.
The video output will be restored to the standard set-
ting, and a picture will once again be visible on a con-
ventional analog TV or monitor.
buttons.
13