Table of Contents
Advertisement
MDD102_62_A0U_ENG_TASHKENT
Operation with RADIO
Presetting the radio stations
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned the vol-
ume down to the minimum level.
Press TUNER/BAND on the remote control to
1 1
show either FM or AM in the display window. Or
Press TUNER on the front panel.
Every time you press this button, AM and FM
changes alternately.
Select a station you want by pressing
2 2
TUNING (-/+) on the front panel or
remote control.
Note
Note
• Automatic Tuning
Press TUNING (-/+) or
second.
- Scanning stops when the unit tunes in a station.
• Manual Tuning
Press TUNING (-/+) or
Press PROG./MEMO. on the remote control.
3 3
A preset number will flash in the display window.
Press
/
4 4
preset number you want.
Press PROG./MEMO. again.
5 5
The station is stored.
Repeat steps 1 (or 2) to 5 to store other sta-
6 6
tions.
To clear all memorized stations
Press and hold PROG./MEMO. on the remote control
for about two seconds, "ERASE ALL" appears in the
display window and then press PROG./MEMO. on the
remote control, the stations are cleared.
For your reference
If all stations have already been entered, "FULL"
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 4-5 .
To recall preset numbers
Press and hold
desired preset number appears or press the button
repeatedly.
3/16/07
9:07 AM
/
on the
/
for more than 0.5
/
briefly and repeatedly.
on the remote control to select the
/
on the remote control until the
Page 21
Listening to the radio
Press TUNER/BAND on the remote control to
1 1
show either FM or AM in the display window. Or
Press TUNER on the front panel.
The last received station is tuned in.
Press
/
on the remote control repeatedly
2 2
to select the preset station you want.
Each time you press this button, the unit tunes in
the next preset station.
Adjust the volume by turning VOLUME
3 3
CONTROL KNOB (or pressing VOLUME (-/+) on
the remote control) repeatedly.
To listen to non-preset radio stations
• For manual tuning, see "Manual Tuning".
• For automatic tuning, see "Automatic Tuning".
To select a preset radio station directly
You can use the number buttons on the remote control
to select a preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9 (within 3 seconds).
To turn the radio off
Press POWER to turn off the unit or select another
function mode (DVD/CD, TAPE, AUX or USB).
For your reference
• If a FM program is noisy ;
Press ST./MONO repeatedly so that that " STEREO "
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
ST./MONO again to restore the stereo effect.
• To improve reception ;
Reposition the supplied antennas.
21
Advertisement
Table of Contents
