Crock-Pot CPE300 User Manual page 8

Before First Use of the Express Crock
Step 1. Remove Packaging
Ensure all packaging has been removed.
Step 2. Position Machine
Place the Heating Base facing you on a dry,
level surface.
Step 3. Wash Parts
Wash the Cooking Pot, Lids and
Condensation Collector in warm water
using a mild detergent. Dry each part
thoroughly before use.
Step 4. Assembly
Insert the Power Cord into the Power Cord
Port and insert the Cooking Pot into the
Heating Base.
Locked Lid
5
CPE300_19EM1.indd 5
Step 5. Standard Lid Assembly
Place Lid upon Multi-Cooker and align
with . To lock, twist counterclockwise,
aligning with . To unlock, twist Lid
clockwise and align
Step 6: Sealing Gasket
Remove the Lid by turning clockwise to
unlock, aligning
Sealing Gasket from the Lid and wash the
gasket and the Lid in warm soapy water.
Dry the Sealing Gasket and Lid thoroughly
before reattaching the Sealing Gasket to the
Lid. Ensure the Sealing Gasket is smoothly
and securely in place in the gasket holder.
If the Sealing Gasket is not in the correct
position the Lid will not be able to form a
seal and will not be able to gain pressure.
Unlocked Lid
with .
with . Remove the
Open Lid
1/3/19 09:56