Advertisement
Blade installation
Install blade bracket with blade by 3 blade screws and
washers provided. Tighten screws securely. Repeat this
process for remaining blades. (Fig. 11)
Remove shipping stabilizers from motor assembly.
Install the blade assembly to motor using the preinstalled
screws. Tighten screws securely. Repeat this process for
remaining blade assemblies. (Fig. 11)
Note: Tighten blade bracket screws twice a year.
Light fixture installation
Warning: Make sure main power is turned off before making
wiring.
Connect WHITE wire from switch housing to WHITE wire from
light fixture. Connect BLUE wire from switch housing to
BLACK wire from light fixture. Be sure plugs connections
snap together completely.
Remove the 3 set screws on top of light fixture, keep
screws. Align the slot on top of light fixture with the reverse
switch on switch housing, and then attach light fixture onto
switch housing. Reinstall the 3 set screws. Securely tighten
all 3 screws. (Fig. 12)
© 2013 Monte Carlo Fan Company
©
shipping stabilizers
Wire connectors (plugs)
Light fixture
7
Screws
Blades bracket
Switch
housing
Screws
Slot
Reverse switch
Screws
Fiber
washers
Blade
Fig. 11
Fig. 12
3/8/2013
/2013
Advertisement
