4.
Select ADVANCED > Administration > Gateway Status.
The Cable Information pane displays the following:
•
Hardware Version. The modem router model.
•
Firmware Version. The version of the modem router firmware. It changes if you
upgrade the modem router firmware.
•
Cable Modem Serial Number. The serial number of the cable modem.
•
CM Certificate. The status of the cable modem certificate. If Not installed displays as
the status, contact your Internet service provider.
•
CM MAC. The MAC address of the cable modem.
•
LAN Port. The MAC address of LAN port 1. The following information also displays:
-
MAC Address. The Media Access Control address. This address is the unique
physical address that the Ethernet (LAN) port of the modem router uses.
-
IP Address. The IP address that the Ethernet (LAN) port of the modem router
uses. The default is 192.168.0.1.
-
DHCP Server. Identifies whether the built-in DHCP server of the modem router is
active for the LAN-attached devices.
For information about using the Reboot button, see
View Internet Port Information
To view modem router Internet port information:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Administration > Gateway Status.
The Internet Port pane displays these WAN Internet port settings:
•
MAC Address. The MAC address of the WAN Internet port.
•
IP Address/Mask. The IP address of the WAN Internet port.
•
Connection. The type of WAN Internet port connection.
•
Default Gateway. The IP address of the default gateway.
•
Domain Name Server. The IP address of the Domain Name Server.
N300 WiFi Cable Modem Router Model C3000
Manage Your Network
68
Reboot the Modem Router
on page 72.