Table of Contents
Advertisement
After-sales service
en
Faults
- P - appears on the
display panel when the
cycle is paused.
- P - and Ï appear on
the display panel when
the cycle is paused.
If you cannot rectify a fault yourself (after switching the machine off and then on again) or a repair is required:
Switch off the appliance and pull the mains plug out of the socket.
■
Turn off the tap and call the after-sales service.
■
4
After-sales service
I f you cannot rectify a fault yourself,
A f t e r - s a l e s s e r v i c e
contact customer services. ~ Cover
page
We will always find an appropriate
solution in order to avoid unnecessary
visits by engineers.
Please give customer services the
product number (E no.) and the
production number (FD) of the
appliance.
E no.
Product number
FD
Production number
You can find this information
*depending on the model:
On the inside of the door*/in the
opened service flap* and on the rear of
the appliance.
Trust the expertise of the
manufacturer.
Contact us for assistance. By doing so,
you will ensure that the repairs are
carried out by trained service personnel
using genuine spare parts.
50
Cause/remedy
The water level is too high. It is not possible to add laundry. Close the door
■
immediately, if necessary.
Press the Ü button to resume the programme.
■
The door is unlocked. It is possible to add laundry.
Advertisement
Table of Contents
