Siemens WM14W59AGR Instruction Manual And Installation Instructions

Siemens WM14W59AGR Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Quick Links

Washing machine
WM14W59AGR
siemens-home.bsh-group.com/welcome
en
Register
your
product
online

Advertisement

Table of Contents
loading

Summary of Contents for Siemens WM14W59AGR

  • Page 1 Washing machine WM14W59AGR siemens-home.bsh-group.com/welcome Register your product online...
  • Page 2 Your new washing machine Note/tip Information about the optimum use of You have chosen a Siemens washing the appliance/any other useful machine. information. Please take a few minutes to read and 1. 2. 3. / a) b) c) become familiar with the advantages of your washing machine.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use.
  • Page 4 Cleaning and maintenance . . . 29 Aqua-Stop warranty ..47 Machine housing/control panel ..29 Drum ......29 Descaling.
  • Page 5: Intended Use

    Intended use Intended use For private domestic use only. ■ I n t e n d e d u s e The washing machine is suitable for ■ washing machine-washable fabrics and hand-washable wool in detergent solution. To be operated with cold mains ■...
  • Page 6: Safety Instructions

    Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. E lectrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning.
  • Page 7: Safety For Children

    Safety instructions Safety for children Warning Risk of poisoning! Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves.
  • Page 8: Environmental Protection

    Environmental protection The more indicator lights light up, Environmental the higher the programme's consumption. protection This enables you to compare the consumption levels of the different P ackaging/used appliance programmes when choosing your E n v i r o n m e n t a l p r o t e c t i o n programme settings and decide on Dispose of packaging in an an energy- and water-saving...
  • Page 9: Main Points In Brief

    Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button.
  • Page 10: Getting To Know The Appliance

    Getting to know the appliance Getting to know the appliance W ashing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 24 Operating/display panel Door with door handle 9S Open the door...
  • Page 11: Control Panel

    Getting to know the appliance Control panel P Child lock (w 3 δευτ.) ( Main switch to prevent the set functions from for switching the washing machine being changed accidentally: on and off: Press and hold the Finish in Press the # button. (Λήξη...
  • Page 12: Display Panel

    Getting to know the appliance Display panel Further information antiStain (Λεκέδες ã) ð ý â ì ~ Page 22 Programme progress: Prewash Washing ¼ Rinse ¬ Spin - 0 - Programme end Default programme settings: ( Temperature in °C Programme end during Rinse Ž...
  • Page 13: Laundry

    Laundry Some examples of soiling levels can Laundry be found on ~ Page 14 – Light: Do not prewash, select the P repare the laundry speedPerfect G setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –...
  • Page 14: Detergent

    Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note...
  • Page 15: Overview Of Programmes

    Overview of programmes Overview of programmes P rogrammes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable.
  • Page 16 Overview of programmes Programme/type of laundry/information Settings Mixed Fabrics (Ανάμεικτα) Max. 4 kg Mixed load of cottons and synthetic fabrics Ž - 40 °C $, 0 - 1600** rpm ecoPerfect ¦, speedPerfect G, Prewash (Πρόπλυση), Water Plus (Επιπλέον νερό), Less Ironing (Λιγότ. τσαλάκωμα) Delicate / Silk (Μεταξωτά) Max.
  • Page 17 Overview of programmes Programme/type of laundry/information Settings *** Drum Clean (Καθαρισμός κάδου) 0 kg Programme for cleaning and caring for the drum and the outer 80, 90 °C tub, e.g. before running the first wash cycle, if washing frequently 1200 rpm at a low temperature (40 °C or lower) or if an odour has developed after a prolonged period of non-use.
  • Page 18 Overview of programmes Programme/type of laundry/information Settings *** Outdoor / Water proofing (Outdoor / Αδιαβροχοποίηση) Max. 1 kg Wash cycle followed by waterproofing of membrane-coated Ž - 40 °C weatherproof and outdoor clothing or water-resistant fabrics $, 0 - 800 rpm Select a programme.
  • Page 19 Overview of programmes Programme/type of laundry/information Settings *** Curtains (Κουρτίνες) Max. 3.5 kg 3.5 kg heavy curtains or 25 - 30 m² lightweight drapes Ž - 40 °C Notes $, 0 - 800 rpm Shorter rinse and final spin cycles. ■...
  • Page 20: Starching

    Overview of programmes Programme/type of laundry/information Settings Shirt / Blouses (Πουκάμισα / Ρούχα γραφείου) Max. 2 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres Ž - 60 °C or blended fabrics $, 0 - 800 rpm Notes ecoPerfect ¦, speedPerfect G, Shirts/blouses are only given a short spin on the Less ■...
  • Page 21: Programme Default Settings

    Programme default settings The maximum speed that can be set Programme default depends on the model and programme that has been selected. settings Finish in T he default programme settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after (Λήξη...
  • Page 22: Additional Programme

    Additional programme settings After starting the programme (if a Pour detergent into Note: Finish in time has been selected and compartments I and II. the wash programme has not yet started), you can change the Water Plus preselected number of hours as follows: Press the Ü...
  • Page 23: Operating The Appliance

    Operating the appliance The indicator light on the programme Operating the selector lights up and the default programme settings for the selected appliance programme appear in the display panel: P reparing the washing Temperature ■ O p e r a t i n g t h e a p p l i a n c e Spin speed machine ■...
  • Page 24: Measure And Add Detergent And Care Products

    Operating the appliance Unfold presorted laundry items and Filling place them in the drum. Warning Make sure that no items of laundry Eye/skin irritation! are trapped between the door and the rubber seal, and close the door. Detergents and care products may spray out if the detergent drawer is opened while the machine is in operation.
  • Page 25: Change The Programme Default Settings

    Operating the appliance Position the measuring aid for dosing Select additional programme the correct amount of liquid detergent: settings Pull out the detergent drawer. Press down the insert and fully remove the By selecting additional settings, you can drawer. better adapt the washing process to Slide the measuring aid forwards, your items of laundry.
  • Page 26: Child Lock

    Operating the appliance Child lock Notes Do not leave the door open for too ■ (w 3 δευτ.) long when adding laundry as water from the laundry may leak out. You can lock the washing machine to For safety reasons, the door remains prevent the functions you have set from ■...
  • Page 27: Programme End

    Appliance settings Programme end Appliance settings - 0 - and Ï appear in the display panel. Y ou can change the following settings: The Ü button indicator lamp is off. A p p l i a n c e s e t t i n g s The volume of the buttons and the ■...
  • Page 28: Changing The Signal Volume

    Sensors Changing the signal volume Sensors Use the Finish in + or - button to A utomatic load sensing change the following settings at the S e n s o r s corresponding programme selector Depending on the type of fabric and positions: load, the automatic load sensing 2: The volume of the information...
  • Page 29: Cleaning And Maintenance

    Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■...
  • Page 30: Detergent Drawer And Housing

    Cleaning and maintenance Detergent drawer and housing If the washing machine contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer. To remove the insert: Push the insert Take the drain hose out of the upwards from below with your finger.
  • Page 31: The Drain Hose At The Siphon Is Blocked

    Cleaning and maintenance To prevent unused detergent Note: Then clean the filter: from flowing straight into the drain Disconnect the hose from the tap. during the next wash: Pour 1 litre of Clean the filter with a small brush. water into compartment II and start the Empty programme.
  • Page 32: Faults And What To Do About Them

    Faults and what to do about them. Faults and what to do about them. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g.
  • Page 33: Information On The Display Panel

    Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and Ï The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■...
  • Page 34: Faults And What To Do About Them

    Faults and what to do about them. Faults and what to do about them. Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the screw fitting on the supply hose. ■ The machine is not filling Have you pressed the Ü...
  • Page 35 Faults and what to do about them. Faults Cause/Remedy Odours in the washing Run the Drum Clean or Cottons 90 °C programme without laundry. machine. Add washing powder or a detergent containing bleach. Note: . To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer.
  • Page 36: After-Sales Service

    After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers.
  • Page 37: Consumption Rates

    Consumption rates Consumption rates E nergy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption*...
  • Page 38: Efficiency Test Programmes For Cotton Fabrics

    Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010 Programme + temperature + button Load Approximate programme...
  • Page 39: Safety Instructions

    Positioning and connecting connect the water drain hose to a siphon. Useful tools Spirit level for aligning ■ Spanner with: ■ – WAF13 for loosening the transport braces, and – WAF17 for aligning the appliance feet Safety instructions Warning Risk of injury! The washing machine is very heavy.
  • Page 40: Installation Surface

    Positioning and connecting Installing the appliance in a Notes In addition to the safety information kitchenette ■ listed here, the local water and electricity supplier may have special Warning requirements. Danger of death! If in doubt, have the appliance ■ There is a risk of electric shock if you connected by a specialist.
  • Page 41: Hose And Cable Lengths

    Positioning and connecting Take the hoses out of the holders. Right-hand connection ■ Unscrew and remove all four transportation securing bolts with a wrench (WAF 13). Remove the sleeves. Remove the mains cable from the holders. The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold...
  • Page 42: Water Inlet

    Positioning and connecting Water inlet Optimum water pressure in the supply network Warning At least 100 kPa (1 bar) Danger of death! Maximum 1000 kPa (10 bar) There is a risk of electric shock if you When the tap is open, the water flow touch live components.
  • Page 43: Water Outlet

    Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin).
  • Page 44: Levelling

    Positioning and connecting Levelling Notes The mains voltage and voltage ■ Align the appliance using a spirit level. indicated on the washing machine (rating plate) are the same. Incorrect alignment may result in loud The connected load and fuse noises, vibrations and machine required are specified on the rating "movement".
  • Page 45: Before Washing For The First Time

    Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory.To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■...
  • Page 46: Transportation

    Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■...
  • Page 47 Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a...
  • Page 48 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001202986* 9001202986 (9704)

Table of Contents