Choosing A Channel - DwarfConnection DC-LINK-LR2 Manual

Choosing a Channel

To press and hold the "Menu" key with 2s, this unlock icon"
1.
shown on the OLED.
To press key "+" or "-" to select this desired channel and then press this
2.
"MENU" key to confirm
The system functions with 4 channels in the license-free 5 GHz ISM frequency band.
to the same channel in or to communicate with each other. If several systems are
used at once, then the channels used should be as far from each other as possible to
avoid interference or a reduction in range. A maximum number of 4 systems
simultaneously is recommended.
Both the transmitter and the receiver have a
frequency selector with positions from 1-4.
Both the transmitter and the receiver have to be set
"
!