Using Smartdiagnosis - LG D1452WLF Owner's Manual

Hide thumbs Also See for D1452WLF:

Table of Contents

TROUBLE SHOOTING GUIDE

NOTE

SMARTDIAGNOSIS function is available only for the products with a SMARTDIAGNOSIS mark.

In case of a mobile phone with static option, the smart diagnosis function might not operate.

Using SMARTDIAGNOSIS

Only use this feature when instructed to do so by the call centre.

The transmission sounds similar to a fax machine, and so has no meaning except to the

call centre.

SMARTDIAGNOSIS™ can not be activated if the dishwasher does not power up.

If this happens, then troubleshooting must be done without SMARTDIAGNOSIS™.

If you experience problems with your dishwasher, call the Customer information centre.

This takes about 17 seconds, and the display will count down the time.

asked to try again.

5. Once the countdown is over and the tones have stopped, the machine will display END

and turn off automatically after a few seconds.

Resume your conversation with the call centre agent, who will then be able to assist you

using the information transmitted for analysis at the call to Customer information centre.

1. Press the

Do not press any other buttons.

2. When instructed to do so by the call centre, place the

mouthpiece of your phone very close to the

(Max. 10mm)

3. Press and hold the

seconds, while holding the phone mouthpiece to the icon

button during the transmission will shut off the SMARTDIAGNOSIS™.

button to turn on the dishwasher.

and

button.

buttons for three

Table of Contents